Best Ring Making Machine Manufacturers in Delhi, India

Looking for a Top Ring Making Machine Manufacturers in Delhi for your construction site or steel fabrication work? Unique Spairparts offers TMT ring bending machines, steel wire ring making machines, automatic stirrup benders and related construction equipment.

Based in Swaroop Nagar, Delhi, we have been serving the construction machinery industry since 2018. We help builders, contractors, dealers and steel fabrication businesses compare machines based on their bar size, bending requirements and available power supply.

Whether you need a machine for regular stirrup work or larger steel bending jobs, you can explore our range and share your requirements with our team.

What is a ring making machine?

A ring making machine bends steel wire or TMT bar into closed rings. Builders also call these rings stirrups. They hold the main bars of a column or beam in place. Unique Spairparts, in Swaroop Nagar, Delhi, offers semi-automatic and automatic ring making machines for bars from 8 mm up to 20 mm.

Bending rings by hand is slow. The sizes also change from ring to ring. A ring making machine fixes both problems. You set the size once, and every ring comes out the same.

Unique Spairparts has served the construction trade from Delhi since 2018. We are a manufacturer and wholesaler of bar bending machines, road paver machines and construction machinery spare parts. This page covers our ring making machine range, what each model can do, and how to pick one.

If you are comparing ring making machine manufacturers in Delhi, we kept this page simple. Every number comes from our own machine listings.

QUICK FACTS

Our Ring Making Machines in Delhi

Steel Wire Ring Making Machine

A semi automatic wire ring making machine for rings and stirrups. It handles up to 20 mm and has a mild steel body.

• Capacity: 20 mm
• Type: semi automatic
• Power: three phase, 50 Hz

Best for: workshops that make rings from wire every day.

TMT Ring Bending Machine

Our automatic TMT ring making machine. It bends TMT bars into rings and stirrups, one after another, with a steady clockwise motion.

• Bending capacity: up to 16 mm
• Motor: 3 HP (2.2 kW), electric
• Bending speed: 20 rpm
• Maximum bending angle: 180 degrees
• Body: MS (mild steel)

Best for: sites and yards that bend TMT bars up to 16 mm.

Automatic Stirrup Benders (GW20)

This one is made for square stirrups in volume. It has a PLC panel, so you set the size on a screen instead of adjusting by hand.

• Bar diameter: 8 to 16 mm
• Round bar capacity: 20 mm
• Output: 1000 to 1500 pieces per hour
• Rebar grade: Fe550
• Type: semi automatic, three phase
• Colour: black or yellow

Best for: yards that need high output and the same stirrup size all day.

TMT Steel Bending Machine

An automatic machine for shaping TMT steel bars.

• Voltage: 415 V
• Bending speed: 10 r/min
• Plate diameter: 370
• Maximum bending angle: 360 degrees
• Made in India

Bar Bending Machine GW52J

This is not a ring maker. It is for thick bars. We list it here so you can see the full range.

• Bar size: up to 50 mm
• TMT bar diameter: 42 mm
• Motor: 4 kW
• Bend direction: clockwise
• Steel body, automatic

Bar Decoiling Machine Coil Stand

A manual stand that holds coiled wire or bar so it feeds smoothly into your machine.

• Decoiling speed: 250 r/min
• Material: iron

Which Ring Making Machine Should You Buy?

Answer these five questions before you call anyone:

1. What bar size do you bend? Up to 16 mm points to the TMT Ring Bending Machine or the GW20. Up to 20 mm points to the Steel Wire Ring Making Machine.
2. How many rings do you need each day? Small jobs suit a semi-automatic ring making machine. Big yards suit the GW20 at 1000 to 1500 pieces an hour.
3. What power do you have? Our wire ring and GW20 models run on three phase.
4. What hook angle does your drawing show? Check for 90 or 135 degrees before you buy.
5. Do you want to see it first? Ask for a demo. A good seller will not mind.

Ring Making Machine Specifications, Explained Simply

Why the 135 Degree Hook Matters in Delhi

Delhi sits in Seismic Zone IV, the second highest risk zone in India. In earthquake zones, the Indian code IS 13920 asks for stirrups with 135 degree hooks. A 90 degree hook can open up when the building shakes. A 135 degree hook turns back into the concrete core and stays shut.

Doing this by hand on site is hard. The angle and the hook length drift. A machine bends each ring the same way.

Two tips:

• Read your structural drawing. It tells you the hook angle and the hook length.
• Make one test ring first. Measure it before you run the whole batch.

Tell us your bar size and hook angle when you call. We will tell you which model fits.

Manual, Semi-Automatic or Automatic: What Is the Difference?

A semi-automatic machine needs a worker to load each bar. An automatic machine does more of the work on its own. Pick by how many rings you make, not by the word on the label.

Why Contractors and Dealers Choose Unique Spairparts

• Delhi address you can visit. Khasra No. 376, Block-J, Swaroop Nagar. Come and see the machine before you pay.
• Working since 2018. We serve contractors, builders, dealers and construction teams.
• Specs in writing. Every machine listing shows its real numbers. No guessing.
• Spare parts are part of our work. We started as a spare parts wholesaler. Ask us about parts for your machine.
• A real person answers. Call, WhatsApp or email. We reply to enquiries directly.

Where Ring Making Machines Are Used

• Building sites for houses, flats and offices
• Rebar bending yards
• Precast and steel fabrication workshops
• Road, bridge and infrastructure jobs
• Contractors and dealers who supply stirrups to others

Basic Care and Safety Tips

1. Have a licensed electrician connect the three phase supply.
2. Keep hands clear of the bending plate when the machine runs.
3. Never bend a bar thicker than the machine’s rated capacity.
4. Oil the moving parts as the manual says.
5. Check wear on the bending parts every week. Replace them before they cause bad bends.
6. Switch off power before any cleaning or repair.

Ring Making Machine Supplier in Delhi and Across India

We are based in Swaroop Nagar, North West Delhi. We serve Delhi NCR and speak with buyers from other cities too. Buying from outside Delhi? Call us and we will explain how delivery works.

Frequently Asked Questions

1. What is a ring making machine used for?
   It bends steel wire or TMT bars into closed rings, also called stirrups. These rings hold the main bars inside beams and columns. A stirrup making machine and a ring making machine are the same thing.
2. How do I pick the best ring making machine manufacturers in Delhi, India?
   Visit the address. See the machine run. Ask for the spec sheet in writing, a GST bill and spare parts support. Be careful with sellers who list many unrelated products and cannot show a machine.
3. What is the difference between a semi automatic and an automatic ring making machine?
   On a semi automatic machine, a worker loads each bar and sets the size. An automatic machine does more of the bending steps by itself. Our TMT Ring Bending Machine is listed as automatic. Our GW20 stirrup bender is semi automatic with a PLC panel.
4. Should I choose a single phase or three phase ring making machine?
   Use the power you already have. Our wire ring and GW20 models run on three phase. If you need a single phase ring making machine, call us and we will tell you what we can supply.
5. How many rings can a machine make in an hour?
   Our GW20 stirrup bender is listed at 1000 to 1500 pieces per hour. The real number depends on the bar size, the ring size and the worker.
6. Do you have a fully automatic, CNC or double side ring making machine?
   Our listed machines are the ones on this page. If you need a fully automatic ring making machine, a CNC stirrup bending machine or a double side ring making machine, call us. We will tell you honestly whether we can supply it.